List of all smart home devices there config address and details needed to use them
10.66.99.205
Running on PC in Landing Cupboard
Smart plugs , light Switches, ect...
NAME: SP-BedFan
IP: 10.66.99.245
MAC: 24-62-AB-20-4F-E1
HA_Name: switch.bedroom_fan_1
Description: Round Tuya Based Smartplug
NAME: SP-SlowCook
IP: 10.66.99.244
MAC: CC-50-E3-3F-F5-CS
HA_Name: switch.power
Description: Round Tuya Based Smartplug
NAME: SP-OilRad
IP: 10.66.99.238
MAC: 24-62-AB-20-53-0c
HA_Name: switch.oil_radiator_1
Description: Round Tuya Based Smartplug
NAME: SP-WaxPot
IP: 10.66.99.239
MAC: 24-62-AB-20-52-0D
HA_Name: switch.wax_pot_1
Description: Round Tuya Based Smartplug
NAME: SP-LoftStair
IP: 10.66.99.240
MAC: CC-50-E3-3F-FE-2C
HA_Name: switch.loft_stairs_socket
Description: Round Tuya Based Smartplug
NAME: SP-RockLight
IP: 10.66.99.241
MAC: CC-50-E3-3F-F9-DA
HA_Name: switch.rock_light_socket
Description: Round Tuya Based Smartplug
Smart plugs , light Switches, ect...
Name: Boiler
IP: 10.66.99.50
Mac: C4-4F-33-C47-A4-70
- Sonoff Dual Mounted above boiler
- ESPHome Custom Code direct from home assitant
- Relay-1 controles Boiler Call For Heat as Thermostat
- Relay-2 Controles Garden Light ( 30W LED Cob Pannel)
Button timed press for the following
- Button 0.1-1s Toggles Garden Light Relay
- Button 2.0-6s Toggles Heating Relay Call fro Heat Overide
- Button 9-15s Forces a reboot
Sensors
- Temp/Humidity Sensors DHT11 and Dallas
- DHT11 living room wall temp sensor and button / Leds from Sonoff ReRouted
- Dallas Temp Sensor (Reading Outside Temp Back Garden ( Hole Through Wall )
¶ Bedroom1 Light Switch and Temps
Name: Bedroom1
IP: 10.66.99.54
Mac: 60-01-94-e5-f2-66
- Sonoff Quad Mounted Bed 2 Cupboard
- ESPHome Custom Code direct from home assitant
- Relay-1 1 LED Light Pannel Central
- Relay-2 2 LED Light Pannel Wall
- Relay-3 2 LED Light Pannel Window
- Relay-4 UnUsed
Button timed press for the following
- Button1 - 0.1-1s - Toggle R1
- Button1 - 1.0-5s - HA Service Toggle Tuya Device Bed1_Fan
- Button2 - 0.1-1s - Toggle R2
- Button2 - 1.0-5s - Toggle R3
- Button3 - 0.1-1s - Toggle R2,R3
- Button3 - 1.0-5s - Turn OFF R2,3
- Button4 - 0.1-1s - Toggle R1,2,3
- Button4 - 1.0-5s - Turn OFF R1,2,3
Sensors
- Temp/Humidity Sensors DHT11 and Dallas
- DHT11 bedroom switch temp sensor and 4xButton from Sonoff ReRouted
- Dallas Temp Sensor (Reading Outside Temp Front Garden ( Hole Through Wall )
Custome Device made using dev boards
Name: HotTub
IP: 10.66.99.98
Mac: 50-02-91-E1-A6-BA
- NodeMCU Loran Board Running VisualAproch LazySpa interface Proxy
- SPI Man in the middle Proxy between Display and pump
- DISP DATA=5, CLK=4, CS=3, Audio=6
- PUMP DATA=7, CLK=2, CS=1
- 6 Wire 2021, Custom PCB
- MQTT CLIENT ID=huttub, Topic=hottub, INT=600s
- 5v-3.3v LLC between NodeMCU/PUMP